Filter
Top Products
21
a Press the [MENU] button for about 7 seconds
● The Setup menu appears on the LCD. On-screen display of the Setup
menu is not possible.
b Press the [J/K] buttons to select an item for setting
Example: To change the AACTIVE OUTPUT TYPEB setting value
c Press the [H/I] buttons to change the setting value
Example: To change AANALOG RGB+DVIB to ADVIB
d Repeat steps b, c to set other items
e Press the [MENU] button twice to exit the Setup
menu
Operating the Setup Menu
Operate using the buttons on the remote control.
OFF
DVD
MENU
BRIGHTNESS CONTRAST
COLOR DETAIL
ANAMORPHIC
TINT
4:3 LETTERBOX
VIDEO
S-VIDEO DVI/RGB YCrCb
PASS/TX
PROFILE
1 2 3
4 5 6
7 8 9
0
STORE
Menu
Operation
NOTE:
To set the scan rate (ASET: NTSC SCANRATEB or ASET: PAL
SCANRATEB), select a value, followed by pressing the [STORE] button
twice.
SET: NTSC SCANRATE
1280 ן 720
SET: ACTIVE OUTPUT
ANALOG RGB + DVI
SET: ACTIVE OUTPUT
DVI
ENGLISH
LD-HD2KU_E.book Page 21 Thursday, November 17, 2005 4:27 PM