Filter
Top Products
Programme selection
TV programme selection by number entry
You can select a different TV programme during a current TV programme by enter-
ing the programme location number.
Use the number buttons
1to 0for the purpose of entering the programme lo-
cations.
Example You wish to select the TV programme "DSF". This programme is stored under the
programme location number 015. (The order of TV programmes is defined in the
programme memory and therefore only serves as an example here.)
To select this programme, press the numbers
1and 5one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
Switching over to radio programme
You can switch over from a TV programme to a radio programme.
Press the
Rbutton on the remote control for this purpose.
The receiver switches over to the programme location of the radio programmes last
set. You can return to the TV programme by pressing the same button or
T. The
corresponding display relating to the received programme, i.e. as when selecting
the TV programmes, appears on the screen. The LCD display shows a small "r"
together with the programme location number.
The screen will be blanked out after several seconds.
Reception status - radio
After the switch-over of the receiver, simply press the oubuttons to select
other radio channels in their ascending or descending order in the channel mem-
ory.
Every time you press the button, an on-
screen display shows you the selected
programme together with the time, the
programme start and end times as well as
the programme title in the information box
provided these data are transmitted
together with the signal.
By pressing the
Obutton, you can leave this information box permanently dis-
played or switch it off by pressing the button once again.
A further option of selecting a different
programme is to press the
ibutton. The
radio programme list is now displayed. In
the left column, it will provide information
relating to the received satellites, the
transponder and its transmission fre-
quency, the polarisation, the symbol rate
and the scrambling. The programme
number, the programme broadcaster and
the type of reception signal (free to-
air/scrambled) is shown on the right.
20