Sound settings
Sound settings
Setting the volume
Set the required volume level by pressing
the
-+ buttons on the remote control of
the receiver. A bar indicator is displayed
on the screen to show the set volume.
Stereo and two-channel sound reproduction
The channel identifier, which you can display by pressing the Obutton, shows the
set sound reproduction. (Depending on the direction of the symbolised sound
waves – under the displayed time – mono
left, mono right or stereo can be set. The
digit indicates the number of transmitted
sound channels). The programme title is
shown in the box on the right.
Press the
sbutton to call up the audio
menu for sound and language selection.
You can now make the required settings,
e.g. language selection, provided the
corresponding data is contained in the reception signal (sound track), Dolby
Digital (5.1 CH). Select the menu points by pressing the
oubuttons and
select the required setting with the
-+buttons. Press the sbutton once again to
exit the menu.
AC3
The receiver can process sound transmissions in AC3 format (Dolby Digital)
providing you with the opportunity of listening to cinema sound quality in your living
room. The digital sound output is provided for this purpose. You will need to con-
nect it to a corresponding system.
Please refer to the instructions manual of your Dolby Digital system.
In order to reproduce the AC3 format, set your receiver in the audio menu under
"stereo" to “2 of 2" or "2 of 2 (2ch)". The corresponding transmission – "5.1 Ch" (5
channels + 1 subwoofer channel) is then indicated at “Dig. output”.
If AC3 format is not transmitted, you will only be able to select the standard stereo
or mono settings or select the broadcast language.
Mute
Press the lbutton on the remote control to mute the sound. This symbol
lappears on the screen.
Press the
lbutton again to restore the sound. The standard volume display bar
is then shown for several seconds.
Although you can change the programme while in mute mode, it will remain muted
until this mode is cancelled or you correct the volume.
25