Safety instructions
Important notes for siting and installation.
Place of installation
Every electronic device generates heat. The rise in temperature, however, lies
within a safe range. Slight colour changes may occur to sensitive furniture surfaces
and veneers over the course of time due to the constant effect of heat. In conjunc-
tion with treated furniture surfaces, the unit’s rubber feet can likewise give rise to
changes in colour. Where necessary, place the unit on a suitable pad.
Ventilation
The heat that is generated in this unit is dissipated quite adequately. Never install
the receiver in a cabinet, shelf or rack with inadequate ventilation. Never close off
the cooling slots on the unit.
Do not place objects on top of the unit. Maintain a clearance of at least 10 cm
above the unit so that the heat generated within the unit is conducted away without
obstruction.
Humidity, exposure to sunlight, heat
Protect the unit against humidity, drips and splashing.
Do not place the unit close to radiators nor expose it to direct sunlight.
Mains voltage
Operate the receiver only from a 230V / 50 Hz mains voltage.
The unit must not be connected to the mains and switched on until after the con-
nections have been set up for the antenna and TV set.
Grounding
The parabolic antenna is to be grounded in accordance with regulations. The rele-
vant local and/or German VDE regulations are to be complied with here.
8