Filter
Top Products
Password
Password
You can prevent your satellite receiver to be used by unauthorised persons by
means of a password. With this password, you can ensure your reception settings
are not changed by other persons. At the same time, you can activate the parental
control function to lock out various programmes.
Keep your password in a safe place so that you always have access to your
channels should you ever forget it.
Factory setting
The password „0000“ inactively set in the factory.
Entering a password
Call up the mains menu by pressing the
M button:In this menu, press the
ou buttons to select the "system
parameters" and confirm by pressing
O.
Now press the
ou buttons to select
the "parental control" function and confirm
by pressing O. You may be asked to
enter a password.
Carry out the following settings in this on-
screen display:
Age limit: This setting is only effective if
the corresponding lock-out signals are
sent together with the transmission..
Lock list: Yes/No. With this option you can
lock or unlock the editing function for
channel lists.
Lock installation: Yes/No. With this option you can lock or grant access to the in-
stallation menu.
New password: Here you can enter your (new) password with the aid of the num-
ber buttons.
Confirm password: Here you enter your (new) password once again with the num-
ber buttons to serve as a confirmation.
Personal: Here, enter the receiver identification which is displayed when the re-
ceiver is turned on. This is useful for identification in case of theft. See section
"operating instructions" for information on how to use the numerical buttons on the
remote control for alphanumerical entry. The factory setting is „UFD 515“.
You have now undertaken all the settings for safeguarding and identifying your
satellite receiver.
If you have forgotten the password, contact your supplier, who clears your receiver
again.
32