Filter
Top Products
On Screen Display (OSD)
19
Press
to quit the help function and return to the main menu. Press
again to return to the original programme you were receiving.
TV Channel Identifier
The channel identifier is displayed for a few seconds each time you
change the programme or constantly if you press the
button. The i
indicates that a channel is being received even if no picture can be
seen (e.g. radio). The TV symbol indicates a TV channel - adjacent to
it is the selected programme, whether Videotext/Teletext is being
received, and the current time. The + on the third line indicates the
programme selection from the master list. If the Favourites list is
selected, the “apple” symbol appears here. This is followed by the
programme title, the start and end time of the current programme, and
the next programme, if this data is being transmitted.
Radio Channel Identifier
The message for the set radio channel has the same layout. A radio
receiver symbol in the top left-hand corner indicates that it is a radio
channel.
Error Signalling
“Weak signal or no signal” indicates that an error has occurred in the
reception system or in the receiver settings, or that the transponder is
not sending. The channel identifier shows a satellite antenna instead
of the
i. Check the Sat IF connection and the LNB configuration. The
list of service settings at the end of this manual can be used to help
you do this.