Filter
Top Products
Adding/Removing Satellites
71
You can now make the entries in the relevant items according to your
reception system using the
buttons. Press
three times
to exit the menu. The new transponder data is saved.
Entering a Satellite Name
You can change the satellite name in the “LNB Configuration” menu
using the number pad buttons. For information on how to do this, refer
to the “Operating Instructions” section.
Removing Satellites
To remove a satellite, open the main menu by pressing
, select
“Installation” with
, select “LNB Configuration” with
and use the
buttons to move the cursor bar onto the satellite you want to
remove. After pressing
, you are asked if you want to remove
the satellite, and can confirm or decline the prompt.
Pay attention to the
bar at the bottom of
the on-screen display!
It provides guidance
on what to do next.