Filter
Top Products
Channel List
23
A further option for selecting a different programme is to press the
button. The TV channel list is then displayed. The top right-hand
column provides information relating to the satellite being received,
the transponder and its transmission frequency, the polarisation, the
symbol rate and the encryption. The left-hand column shows the
programme location and name, the type of signal being received
(FTA/encrypted), the favourites, and any locked channels.
Press the
buttons to move to the next programme, and use the
buttons to jump to the next or previous page.
You can also select a programme by entering a number.
Press the
button to exit the programme list and return to the
programme already selected.
Selecting a TV Programme by Number
You can select a different TV programme while a programme is
running by entering the new programme's location number. Use the
number pad buttons
to
to enter the programme locations.
Example: You want to select "DSF“ at location number 15 (the order of TV
programmes is fixed in the programme memory, so this only serves as
an example).
To select this programme, press the numbers
and
one after
the other. The receiver waits for about two seconds for input of the
next number.
Do not input leading zeroes in front of the number. The 0 button
is reserved for switching to AV mode.
The procedure for all other programmes - including those with three-
or four-digit location numbers - is exactly the same.
Pay attention to the
bar at the bottom of
the on-screen display!
It provides guidance
on what to do next.