Filter
Top Products
Technical Appendix
87
Technical Appendix
Technical Features
The twin-Sat receiver UFD 580 has two separate reception and signal
processing paths. This allows you to record a programme and
simultaneously zap through other programmes, or to record two
different programmes and at the same time watch one of them (either
live or time-shifted) or another previously recorded programme.
The following functions are also available:
Reception of digital TV and radio programmes
Common Interface for two CA modules for Pay TV (not included)
Suitable for software updating via satellite or RS232 port
PIP (Picture-in-Picture), optional access across all channels
One-touch recording
Time-shift recording
Loop-through Sat IF input
Videotext/Teletext processing internal and via TV set
4000 programme memory slots
Satellite input frequency range from 2 x 950 MHz to 2150 MHz
EPG (Electronic Programme Guide with timer function)
USB 2.0 port for hard disk data download
(PC software available from http://www.kathrein.de/esc-kathrein/
download/ufd/firmware_ufd580.cfm)
Mains switch with mains power isolation
Automatic date and time setting via DVB data stream
On-screen display (OSD) in 8 languages (Dutch, English, French,
German, Italian, Portuguese, Spanish, Turkish)
4-character LED display
DiSEqC™1.2 and tone burst control signal
Operation with UFO
®
mini and UFO
®
micro
RS 232 port for data copying
Programme scan and sort functions
Automatic aspect ratio recognition (optional 4:3 or 16:9 picture format)
Volume adjustment and muting
Radio button
Infrared remote control
2 Scart sockets (TV and VCR/AUX connection)
Additional audio outputs via cinch sockets
Electrical and optical output for Dolby Digital data stream output (AC 3)
RF level indicator