Filter
Top Products
Installation Menu
78
Transponder Selection
The following settings are now possible (select items with
):
• Select desired satellite with
or
.
• Select transponder frequency with
or
.
• Select polarisation with
or
.
• Select symbol rate with number pad buttons.
• Select scan mode for FTA only or FTA and scrambled
programmes with
or
.
• Delete transponder (refer to note on page 79).
The bar chart shows the relative signal strength, and is not an
indicator of the quality of the reception system.
Start the scan by pressing
from the “Scan” entry.
Press
to exit this menu and skip to the programme highlighted by
the cursor bar.