Filter
Top Products
10 KODAK Display Manager System V4.0 User’s Guide
Installing and Setting Up Your System
IRIX Installation
IMPORTANT
You must be logged in as root (IRIX Operating System) to install the Display
Manager System.
To install the Display Manager System on an IRIX computer, you should be
familiar with the IRIX inst or swmgr command.
The required files can be found on the installation CD in the dist directory.
Make sure that you have the following files:
•kdm
• kdm.idb
•kdm.sw
The IRIX computer must be running IRIX 6.5x with the corresponding version
of NFS.
To install on an IRIX system:
1. Insert the installation CD into the CD-ROM drive.
2. Mount the CD-ROM.
3. Launch inst or swmgr.
4. Select the kdm package from the mounted CD-ROM drive.
5. Complete the installation by following the on-screen prompts.
6. Connect the hardware to your computer. See “Step 2: Connect the
Hardware” on page 11.
LINUX Installation
IMPORTANT
You must be logged in as root (LINUX Operating System) to install the Display
Manager System.
To install on a LINUX system:
1. Insert the installation CD into the CD-ROM drive.
2. Mount the CD.
3. Change directory to the mounted CDROM.
4. Type rpm -Uvh KODAK_DMS-4.0.0.i386.rpm to begin the installation
process.
5. Connect the hardware to your computer. See “Step 2: Connect the
Hardware” on page 11.
NOTE
Configure your panel (taskbar) to allow other windows to appear above. Or set
your panel to autohide.