Filter
Top Products
The RC Configuration Software
11
4.2.3 Creating a Driver Command
You can write two types of commands to a connected device (for example, a
DVD
1
):
Serial commands (see section 4.2.3.1)
IR commands (see section 4.2.3.2)
4.2.3.1 Creating a Serial Command
To write the serial commands for the selected device, click the New button in
the Serial Commands area. The New Serial Command window appears. Type
the new command name:
Figure 9: New Serial Command Window
A Serial Command type area appears, as illustrated in Figure 10.
Figure 10: Writing the Serial Commands
The serial commands created can be sent via the RS-232 and RS-485 ports.
1 Or a Kramer machine