Filter
Top Products
Contents
i
Contents
1
Introduction 1
2
Overview 1
2.1
System Requirements for the Kramer RC Configuration 2 Software 2
2.1.1
System Requirements 2
2.1.2
Operating Systems 2
3
Initial Planning 3
4
The RC Configuration Software 4
4.1
Installing the Software 4
4.2
Downloading and Installing the Drivers 6
4.2.1
Download the Drivers 6
4.2.2
Install the Drivers 7
4.2.3
Creating a Driver Command 11
4.3
Port Mapping 13
4.4
The Kramer RC Configuration Main Window 15
4.4.1
The RC Command Area 18
5
Creating a Macro 20
5.1
Labeling the Buttons 22
5.2
Creating a Driver Command 23
5.2.1
An RS-232 Command – Switch Input to Output 23
5.2.2
A Relay Command – Turn Lights ON 24
5.2.3
A Switcher Command 24
5.2.4
A Power Amplifier Command 25
5.2.5
An LCD Keypad Command 26
5.2.6
Setting the Button State and Color 26
5.2.7
The Ignore Button Command 27
6
The Kramer RC Configuration Menus 28
6.1
The File Menu 28
6.2
The Edit Menu 29
6.3
The Configuration Menu 29
6.4
The Device Menu 30
6.4.1
The Connect Command 30
6.4.2
The Device Properties Dialog Box 31
6.5
The Help Menu 31
6.6
Load Firmware 32
7
Connecting a Room Controller as a Stand Alone Device (Master) 34
7.1
The Port Manager in the Stand Alone Mode 35
7.2
The Device Properties Window in the Stand Alone Mode 35
8
Connecting via the ETHERNET 36
8.1
Connecting the ETHERNET Port directly to a PC (Crossover Cable) 36
8.2
Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 37
9
Writing a Configuration 37