Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Writing a Configuration
38
To write a configuration to the device, do the following:
1. Connect the PC to the:
RC-6x (stand alone) to write the configuration directly to the RC-6x
SV-551 (in a SummitView™ kit setup) to write the configuration to
the SV-551
2. From the File menu, select Load Configuration
1
… .
The Open window appears (see Figure 55).
3. Click Open
1
4. In the Device area in the RC Configuration 2 main window, click the Write
Configuration button
2
.
The configuration is written to the device.
Figure 55: Loading a Configuration
1 Skip this step if you have the desired configuration loaded
2 The Write Configuration button is enabled only when the device is connected