Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The RC Configuration Software
12
4.2.3.2 Creating an IR Command
To create IR commands for a selected device, connect the RC device directly
1
to your PC via the USB connector and use the remote control transmitter
2
to
learn its IR commands.
To write a new IR command to the RC device:
1. Click the New button in the IR commands area to type the new command
name.
The following window appears:
Figure 11: New IR Command Window
2. In the Command area, click the Connect to IR Capture Device button (see
Figure 13), select the port and click OK:
Figure 12: Connect to IR Capture Device Window
3. Click the Read IR button to read the command.
The command area displays the following message: “Ready for reading IR
command. Please send IR command to the device”.
4. Press the appropriate button on the remote control transmitter.
The command area displays the following message: “IR command reading”.
The IR command appears, as illustrated in Figure 13:
1 Whether it is defined as a Slave or a standalone Master
2 Of the machine from which you want to learn the IR commands. For example, use the DVD control transmitter to write the
DVD commands to the driver manager