Filter
Top Products
t_taltation
How to connect
1. To get the best pic_Jre quaJity, adjust the PC
graphics cord to 1024x768, 75Hz.
2. Use the Monitor's RG8 INPUT or DVI (Digital
Visual Interface) INPUT pod for video connections,
depending on your PC connecter.
- If the graphic card on the PC does not out4out
anaJog and digi_ RGB simultaneously, connect
only one of either RGB INPUT or DVJ INPUT to
display the PC on the Monitor.
* If the graphic card on the PC does output _a_
and digital RGB simuttaneously_ set the Monitor
to either RGB or DW; (the other mode is set to
Plug and Ptay automatically by the Monitor,)
3. Then, make the corresponding audio connection, ff
using a sound card, adjust the PC sound as
required.
0¸ O
oeo o, tt
HOW to USe
1, Turn on the PC and *.he Monitor,
2, Turn on the display by pressing the POWER button on the Monitors remote control,
3, Use INPUT SELECT on the remote control to select RGB, or DVJ source,
4, Check the image on your Monitor, There may be noise as_ciated with the ress_ution, ve_cal pattem, contrast or brightness in
PC mode, tf noise is present, change the PC mode to another reso_ution_ change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is dear, tf the refresh rate of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card,
NOTES; • Use a DVI cobie
• Avoid keeping afixed image on the Monitor's screen for a long period of time, The fixed image may become perma-
nent_y imprinted on the screen, Use the Orbiter screen saver when possible,
• The synchronization input form for Hodzonta_ and Ve_cal frequencies is separate
14 Plasma Monitor