Filter
Top Products
26. ISM Method (Command2:p)
I_ To avoid having a fixed image remain on screen,
Transmission
[[j][p][ ][Set ID][ ][Data][Cr] ]
Data 0: Normal 2: Orbiter
1: White wash 3: Inversion
Acknowledgement
[[p][ ][Set ID][ ][OK][Data][x] ]
27. Low Power (Command2:q)
IP-To control the low power function on/off.
Transmission
[[j][q][ ][Set ID][ ][Data][Cr] ]
Data 0: Low power off
1: Low power on
Acknowledgement
[[q][ ][Set ID][ ][OK][Data][x] ]
28. Orbiter Time Setting (Command2:r)
I_ To adjust orbiter operation time term.
Transmission
[[j][r][ ][Set ID][ ][Data][Cr] I
Data Min: 1 ~ Max: FE
Acknowledgement
[[r][ ][Set ID][ ][OK][Data][x] I
29. Orbiter Pixel Setting (Command2:s)
I_ To adjust pixel number in orbiter function.
Transmission
[[j][s][ ][Set ID][ ][Data][Cr] I
Data Min:l - Max:9
Acknowledgement
[[s][ ][Set Ig][ ][OK][gata][x] I
30. Picture Size Setting for Double Window
mode (Command2:t)
I_ To adjust main window size in Double Window mode,
Transmission
[[j][t][ ][Set ID][ ][Data][Cr] I
Data Min: 0 ~ Max: 1~20
• Refer to 'Real data mapping1'. See page 30.
Acknowledgement
[[t][ ][Set ID][ ][OK][Data][x] I
External Control Device Setup
31. Auto Configure (Command2:u)
I_ To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
I[j][u][ ][Set ID][ ][Data][Cr] I
Data 1: To set
Acknowledgement
I[u][ ][Set ID][ ][OK][Data][x] I
32. Send IR Code (Command: m c)
I_ To send IR remote key code
Transmission
[[m][c][ ][Set ID][ ][Data][Cr] ]
Data Key code: Refer to page 35.
Acknowledgement
[[c][ ][Set Ig][ ][OK][gata][x] ]
Owner'_ Manual 33