Filter
Top Products
Operation
Menu Options
APC adjusts the Monitor to the best picture appeared.
- ff adjusting picture options (contrast, brightness, color, sharpness, or tint) manually, APC automatically
changes to Off.
1 Press the APC button repeatedly to select the picture appearance setup option as shown below.
• You can also adjust AM Jnthe _CTURE menu.
• _nght, Optim_ and Night t_e se_ngs are preset for good picture qua[i#y at the factory and cannot be
changed.
- XD is LG Ele_ronic_s unique picture improving technology to display a real HD
source through an advanced digita_ signal processing a_r_hm
When selecting APC o_ions (C_eac Optimum and Soft), XD is automatically
change to On
1. Press the MENU button and then use &/V button to select the PICTURE menu.
2. Press the I_ button and then use A/V button to select XD.
3. Press the I_ button and then use A _Y button to set On or Oil.
4_ Press the OK button to save
Auto Color Temperature Control
To initialize values (reset to defauUt settings), select the Normal option.
1, Press the MENU button and then use A /V button to select the PICTUPJ_ menu.
2. Press the I_ button and then use &/V button to select _.
3, Press the I_ button and then use & /V button to select either; COOl (Preset),
Normal (DefauJt) or Warm (Preset)
4 Press the OK button to save_
Manual Color Temperature Control (3u_C set to Off option)
- You can _ust red, green, or b_ue to any co[o_ temperature you prefer.
1. Pre_ the MENU button and then use A /Y button to select the PICTURE _nu.
2. Press the II_ b_ton _d then use A _'V button to select J_CC.
3 Press the I1_ button _d then use _/_ button to select Off.
4. Press the I_ button and then use _ iV button to select Red, Green or Blue.
5. Use the _1 zI_ button to make appropriate adjustments.
• The adius_ment range of Red, _n, and Blue is -30 ~ +30.
6. Press the OK button to save.
Owner's Manual 17