Filter
Top Products
ExternalControlDeviceSetup
01. Power (Command2:a)
• To control Power On/Off of theTV.
Transmission
[[k][a][ ][Set In][ ][Data][Cr] ]
Data 0 : Power Off 1 : Power On
Acknowledaement
[[a][ ][Set ID][ ][OK][Data][x] J
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
• To select input source for the Monitor.
You can also select an input source using the
Monitor/VIDEO button on the Monitor's remote control.
Transmission
[[k][b][ ][Set ID][ ][Data][Cr] ]
Data 1 : Video 4 : Component 2
2 : S-Video 5 : RGB
3 : Component 1 6 : DVI
Acknowledaement
[[b][ ][Set In][ ][OK][gata][x]
03. Aspect Ratio (Command2:c) (Main picture format)
• To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[[k][c][ ][Set ID][ ][Data][Cr] J
Data 0 : Normal screen (4:3)
1 : Wide screen (16:9)
2 : Horizon
3 : Zoom
Acknowledqement
[[c][ ][Set In][ ][OK][Data][x] ]
04. Screen Mute (Command2:d)
• To select screen mute on/off.
Transmission
l[k][d][ ][Set In][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledaement
l[d][ ][Set In][ ][OK][Data][x] J
30 Plasma Monitor
05. Volume Mute (Command2:e)
• To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
[[k][e][ ][Set In][ ][Data][Cr] ]
Data 0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Acknowledqement
[[e][ ][Set In][ ][OK][Data][x] J
06. Volume Control (Command2:f)
• To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
I[k][f][ ][Set In][ ][Data][Cr] ]
Data Min:0- Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledqement
I[f][ ][Set In][ ][OK][Data][x] ]
07. Contrast (Command2:g)
• To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmlsslon
[[k][g][ ][Set In][ ][Data][Cr] ]
Data Min:0~ Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledqement
[[g][ ][Set In][ ][OK][Data][x] ]
08. Brightness (Command2:h)
• To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Transmission
I[k][h][ ][Set In][ ][Data][Cr] ]
Data Min:0~Max:64
• Refer to 'Real data mapping 1' as shown below.
Acknowledqement
I[h][ ][Set In][ ][OK][Data][x] I
* Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100