Filter
Top Products
ExternalControlDeviceSetup
18. Bass (Command2:s)
I_ To adjust bass.
You can also adjust bass in the Sound menu.
Transmission
[[k][s][ ][Set ID][ ][Data][Cr] J
Data Min: 0 ~ Max: 64
+ Refer to 'Real data mapping 1'. See page 30.
Acknowledqement
[[s][ ][Set ID][ ][OK][Data][x] J
19. Balance (Command2:t)
I_ To adjust balance.
You can also adjust balance in the Sound menu.
Transmission
[[k][t][ ][Set ID][ ][Data][Cr] J
Data Min: 0 + Max: 64
• Refer to 'Real data mapping 1'. See page 30.
Acknowledqement
[[t][ ][Set ID][ ][OK][Data][x] J
20. Color Temperature (Command2:u)
I_ To adjust color temperature,
You can also adjust ACC in the Picture menu.
Transmission
[[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Normal
Acknowledaement
[[u][ ][Set ID][ ][OK][Data][x]
2: Warm
J
3: Off
21. Red Adjustment (Command2:v)
I_ To adjust red in color temperature.
Transmission
[[k][v][ ][Set ID][ ][Data][Cr] J
Data Min: 0 ~ Max: 3C
• Refer to 'Real data mapping 3' as shown right.
Acknowledqement
[[v][ ][Set ID][ ][OK][Data][x] J
22. Green Adjustment (Command2:w)
I_ To adjust green in color temperature.
Transmission
[[k][w][ ][Set ID][ ][Data][Cr] J
Data Min: 0 + Max: 3C
• Refer to 'Real data mapping 3' as shown right.
Acknowledqement
[[w][ ][Set ID][ ][OK][Data][x] J
32 Plasma Monitor
23. Blue Adjustment (Command2:$)
I_ To adjust blue in color temperature.
Transmission
[[k][$][ ][Set ID][ ][Data][Cr] J
Data Min: 0 - Max: 3C
• Refer to 'Real data mapping 3' as shown below,
Acknowledqement
[[$][ ][Set ID][ ][OK][Data][x] J
* Real data mapping 3
0 :-30
1 : -29
2 :-28
1E:0
3A : +28
3B : +29
3C : +30
24. SUB Input Select (Command2:y)
I_ To select input source for sub picture in PIP mode.
Transmission
[[k][y][ ][Set ID][ ][Data][Cr] I
Data 1 : Video 4 : Component 2
2 : S-video 5 : RGB
3 : Component 1 6 : DVl
Acknowledqement
[[y][ ][Set ID][ ][OK][Data][x] I
25. Abnormal State (Command2:z)
I_ To recognize an abnormalstate,
Transmission
[[k][z][ ][Set ID][ ][FF][Cr]
Data FF:Read
Acknowledaement
[[z][ ][Set ID][ ][OK][Data][x]
Data 0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
I
Normal (Power on and signal exist)
No signal (Power on).
Turn the monitor off with remote control.
Turn the monitor off with Sleep Time function.
Turn the monitor off with RS-232C function.
5V down.
AC down.
Turn the monitor off with Fan Alarm function,
Turn the monitor off with Off Time function.
Turn the monitor off with Auto Off function.
* This function is "read only".