DVR Menu Operation (Continued)
44
Program List
The Program List shows the recorded programs etc. that have been stored
on the HDD (Hard Disk Drive).
Program List Setting, General Operation
1
Press MENU.
The main menu appears.
2
Use
3
/
4
to select the DVR menu then press
2
or (SELECT) to
move to the second level.
3
Use
3
/
4
to select the Program List option.
4
Press
2
or (SELECT) to display the Program List.
The Program List shows title of the program, date, and duration.
5
On the Program List menu, use
1
/
2
to select a program.
A series of snapshots of the selected program appear if the program
remains highlighted.
6
Press (SELECT) to play the program or
4
to display the menu.
The menu will be displayed as shown to the left.
PLAY: Plays back the selected program.
DELETE: Deletes the selected program.
TITLE: Inserts the program title.
You can insert a program title. Key in the title using 3 / 4 / 1 / 2 or
(SELECT). Then choose “OK” then press (SELECT) to install the
program title.
DETAIL: Shows detailed information about the program.
DVHS OUT: HDD content backup to DVHS.
7
Press EXIT or PROG.LIST button to remove the Program List.
otes
• If the HD DVR finds a bad sector on the hard disk, one or all programs
may be deleted from Program List.
• Total number of programs on the Program List can be up to 128.
• Duration may show “0” if recording is not done properly. (For example,
insufficient disk space, no signal, incorrect program time, DVR error, etc.)