Filter
Top Products
60
Programming the Remote Control to Operate Other Devices
The HD DVR remote control is a multi-brand universal remote control that
can be programmed to operate most remote-controllable devices from other
manufacturers.
ote
The remote control may not be able to control all models of other brands.
1
Test your remote control.
To find out whether your remote control can operate a device without
programming, turn on the device such as a VCR and select the corre-
sponding mode (VCR) using MODE on the remote control while pointing
at the device. Use POWER and CH +/– buttons to see if the device
responds properly. If not, the remote control mode needs to be pro-
grammed to operate the device.
2
Turn on the device to be programmed. Then select the correspon-
ding mode (VCR, AUX, TV, DVD or STB) with the MODE button on
the remote control.
3
Press POWER and MUTE buttons simultaneously.
The remote control is now ready to program a code for the device.
4
There are two ways to find the correct code for the device.
First, if you press CH + buttons repeatedly, the codes will change one at
a time. If the right code is found, the device will turn off.
Second, enter the code number using the number buttons on the
remote control. Code numbers for various device can be found on the
following pages. If the code is correct, the device will turn off.
5
Press EXIT button to store the programming code.
6
Test the remote control functions to see if the device responds
properly. If not, repeat from step 2 to step 6 above.