Filter
Top Products
The Battery
NOTE
It is important to fully charge the
battery before initial use of the
phone.
The phone comes with a
rechargeable battery. The battery
charge level is shown at the top of
the LCD screen.
Installing the Battery
To install the battery, insert the edge
with the battery contacts into the
opening on the back of the phone.
Push the battery down until it clicks into
place, then attach the back cover.
Removing the Battery
Turn power off and slide the back
cover down to remove it. Use the
fingertip cutout at the edge of the
battery to lift the edge of the
battery to remove it.
Charging the Battery
Your
Chocolate
®
TOUCH
device
comes with a cableless wall adapter
and a USB data cable which
connect together to charge your
phone. To charge your phone:
NOTICE
Please use only an approved charging
accessory to charge your LG phone. Improper
handling of the charging port, as well as the
use of an incompatible charger, may cause
damage to your phone and void the warranty.
1. Connect the USB data cable into
the cableless wall adapter, as
shown below.
2.
Gently uncover the phone's
accessory/ charging port. Then
plug the USB data cable (as
shown in the next image) into the
accessory/ charger port and the
other end into an electrical outlet.
NOTICE
Please make sure that the
'B' side is facing up before
inserting a charger or data
cable into the charger port
of your phone.
Getting Started with Your Phone
24
Cableless Wall Adapter