Filter
Top Products
Getting Started with Your Phone
26
Format). Warning: Formatting the MicroSD
T
M
card will erase all contents on the card. In the
event the MicroSD
TM
card is used on this
phone without first formatting it, the phone
will display “License acquisition failed” during
OTA downloading or MTP Sync. Song files
downloaded or otherwise purchased from
third party providers and stored on a
MicroSD
TM
card inserted into this device may
be protected or encrypted by such provider
and cannot be played on this device.
Battery Temperature
Protection
Though extremely rare, if the
battery becomes overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.
Battery Charge Level
You can find the battery charge level
at the top right of the LCD screen.
When the charge level becomes low,
the battery sensor sounds a warning
tone, blinks the battery icon, and
displays a warning message. As the
charge level approaches empty, the
phone automatically switches off
without saving.
Turning the Phone On and
Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an
external power source.
2. Press the PWR/END Key
for a few seconds until the
Touch Screen lights up.
Turning the Phone Off
1. Unlock the Touch Screen by sliding
the Slide icon up to unlock or
press the Unlock Key ( ) on the
right side of your phone.
2.
Press and hold the PWR/END
Key until the display turns
off.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the more bars,
the stronger the signal. If you’re
having problems with signal quality,
move to an open area or, when
inside a building, try moving near a
window.