Filter
Top Products
- 20
NICAM auto/off
This DVD recorder can receive Hi-Fi sound transmis-
sions in NICAM Stereo. Bad reception can however
cause distortion. You can switch the function off
(“off“).
Use / to select a program in the “Program
List“ menu, and press OK. The options are
displayed on the left side of the “Program List“
menu.
Use / to select the “NICAM auto/off“
option from the program list and press OK. If
you select “auto“, “NICAM“ appears under the
program shown in the small picture.
Setting the Clock
If the automatic channel search is fi nished, the
date and time will also be set automatically (de-
pending on the broadcasting station), the same is
true when the power supply returns after a power
cut or after the mains cable has been unplugged.
The “Automatic“ option must be set to enable this.
- - - -Year
Time
- - - -Date /
- - - -:
Manual
Automatic
Auto Programming
TV Aspect
Program Edit
Clock Set
Display Mode
AV1 to Decoder
PBC
Factory Set
Press .
The menu is displayed.
Select the “General“ option with / .
Press to call up the second level.
Select the “Clock“ option with / .
Press to call up the third level.
1.
2.
1.
2.
3.
4.
5.
Press / to select the “Automatic“ option
and then press OK.
Press
, to quit the menu.
Note: Check whether the automatic year and date
setting is correct. If necessary they must be set
manually.
Manual Setting of the Date / Time
It is possible that the television station may broad-
cast incorrect date and / or time information or no
information at all and that the DVD recorder sets
the incorrect time. If this is the case we recommend
that you set the clock manually.
Follow steps 1 - 5 as described above (Automatic
Clock Setting).
Use / to select the “Manual“ option and
then press OK.
- - - -Year
Time
- - - -Date /
- - - -:
Manual
Automatic
Auto Programming
TV Aspect
Program Edit
Clock Set
Display Mode
AV1 to Decoder
PBC
Factory Set
Then enter the necessary date and time informa-
tion.
/ (left/right): Moves the cursor to the
previous or next column/line.
/ (up/down): Changes the setting at the
current cursor position.
You can return to the 2nd level by pressing OK
or you can close the menu with
.
6.
7.
1.
2.
3.
4.
TV Aspect
You can choose:
- 4:3: Select this setting if a television set with
4:3 picture format is connected.
- 16:9: Select this setting if a widescreen televi-
sion set with 16:9 picture format is connected.
16:9
4:3
Auto Programming
TV Aspect
Program Edit
Clock Set
Display Mode
AV1 to Decoder
PBC
Factory Set
Initial Installation
32122 DVD Rec_Centros_GB.indb 20 32122 DVD Rec_Centros_GB.indb 20 26.04.2005 11:23:1926.04.2005 11:23:19