Loewe Centros 1202 DVD Recorder User Manual


 
- 26
Vide o Mode
Disc Format
VR Mode
Select a Mode.
Use / to select “Ok“, and press OK.
The following prompt appears:
Disc Format
All Data on the disc will be deleted.
Cancel
OK
Caution: When you start formatting all record-
ings on the disc are deleted.
After pressing OK disc formatting begins. It
can take a few minutes.
Finalization
Finalization xes recordings so that the disc can
be played on a regular DVD player or a computer
with a suitable DVD-ROM drive. During nalization
of a Video mode disc a menu is created for disc
navigation. You can access the menu by pressing
the
button.
Caution: Following recording and nalization
of DVD-R and DVD+R discs no other editing or
recording can take place. This does not however
apply for a DVD+RW and DVD-RW disc.
8.
9.
10.
Finalise
Unfinalise
Disc Format
Finalise
Disc Label
Disc Protect
Follow steps 1 - 3 described on page 25 (For-
matting).
Select the „Finalization“ option with / .
Press to call up the third level.
“Finalization“ is highlighted.
Press OK. The “Finalization“ menu is displayed.
Ok
Finalise
Do you want to finalise?
Cancel
Press OK. The recorder starts nalization of the
disc.
Note: The time needed for nalization depends on
the type of disc, how much is recorded on the disc
and the number of titles on the disc. Finalization of
a prerecorded disc can take up to 8 minutes.
Tip: If you insert a nalized DVD-RW or DVD+RW
disc, the nalization can be reversed by selecting
“Un nalize“ in the “Finalization“ menu. Then the
disc can be edited and re-recorded.
1.
2.
3.
4.
5.
Disc Name
Use this option to enter a name for the disc. The
name is displayed when the disc is loaded and
when you display disc information on the screen.
The disc name can be up to 32 characters long.
For discs formatted on other DVD recorders you
will only see a limited character set.
Edit
Disc Format
Finalise
Disc Label
Disc Protect
Follow steps 1 - 3 described on page 25 (For-
matting).
Select the „Disc Name“ option with / .
Press to call up the third level.
The “Edit“ symbol is highlighted.
Press OK. The “Keyboard“ menu is displayed.
01 3456789
ABCD EFG HIJ
KLMNOP QRST
UVWXYZ
DVD-RW
SpaceOK
Cancel
Delete
2
Upper case letter
Enter a name for the disc. Use  to
select a character. Then press OK to use the
character in the name.
See step 3 on page 19 (Renaming a Station).
Select OK and then press OK to save the name
and to return to the „Disc“ menu.
Press
to quit the menu.
1.
2.
3.
4.
5.
6.
7.
Initial Installation
32122 DVD Rec_Centros_GB.indb 26 32122 DVD Rec_Centros_GB.indb 26 26.04.2005 11:23:2726.04.2005 11:23:27