LOREX Technology SG17LD800 Series DVR User Manual


 
30
Display Menu
OSD (Onscreen Display)
Motion Sensor Display - Turns the
display of the Motion Sensor to:
z - Active: Display motion sensor of motion
detection area.
z - Inactive: Display motion sensor except
motion detection area.
z - Off: No display of motion sensor.
Motion Sensor Color - Sets the motion
sensor color. When Motion is detected
on a channel, the moving parts of the
image will be highlighted with colored
squares (i.e. Blue Squares).
Motion Transparency - Setup motion
transparency. This sets the
transparency of the Motion Sensor
blocks from 0~5.
MONITOR
Sequence Dwell - Sets the cycle time
when the system is in Sequence Mode
(between 1~60 seconds).
Spot-Out Dwell -The length of time to
display a camera in Spot-out mode.
De-Interlace Mode - Removes the
screen spread when set to ON
Alarm Pop-Up Mode - Set to ON/OFF.
Switches the screen display to any
channel when an Alarm is detected.
Alarm Pop-Up Dwell - Determines the
length of time that a channel is displayed
when an Alarm is detected (between
1~60 seconds).
Motion Pop-Up Mode - Set to ON/OFF.
Switches the screen display to any
channel when Motion is detected.
Motion Pop-Up Dwell - Determines the
length of time that a channel is displayed
when Motion is detected (between 1~60
seconds).