Filter
Top Products
91
How do I set the Auto-Recording to OFF? - Appendix #13
Setting Multiple Time Blocks
1. Enter MENU mode by pressing the MENU button
on the front panel of the system (or on the Remote
Control). Select the RECORD MENU Option.
2. Select the SIMPLE RECORDING MODE menu.
Navigate using the up and down arrows on the
front panel (or remote control). Navigate using
the arrow keys
3. Select the Channel Menu (highlights the area in
PINK).
4. Press the ENTER key to enter the configuration mode.
One time block will be highlighted in GREEN.
5. Navigate to the desired time block and press
ENTER. The selected time block will be
highlighted ORANGE. Press the UP, DOWN,
LEFT and RIGHT Arrow keys to highlight multiple
time blocks.
6. Press Enter once more to access the Configuration
Menu. Select NONE, CONTINUOUS, MOTION or
ALARM by pressing the UP and DOWN arrows. Press
ENTER again to accept the change.