Filter
Top Products
79
Using the Storage Calculator - Appendix #9
Using the Storage Calculator - Appendix #9
The Storage Calculator application is used to calculate the amount of recording time available on
your Hard Drive, based on the System Recording Settings. This application is located on the
Software Installation CD (provided with your System)
1. Select the settings to
reflect the options you have
chosen on your System:
CH1~CH8 - Select the
channels to include in the
Recording Calculation
Resolution - Set the
recording Resolution to CIF
(352x240), 2CIF (704x240) or
D1 (704x480)
Quality - Set the recording
Quality to Low, Standard,
High or Highest.
FPS - Set the Frames Per
Second for the recording to 1,
2, 4, 8, 15 or 30 FPS.
HDD Size - Select the size of
the System Hard Drive (160
GB installed HDD is included
with this System).
2. Press the CALCULATE
button. The Software will use
all configurations to provide
recording data specific to
your System.
Main Screen - The Software loads with the following
defaults selected. Use the dropdown selections to
change the options to reflect your System settings.
Example of Recording Time Calculations