Filter
Top Products
99
Setting up Remote Viewing - Appendix #14
Adding a Site (Individual Unit Configuration)
DVR Information - Enter
the information specific to
the unit (refer to page 30
for setup instructions):
• Name - Enter a name for
the unit.
• IP / Domain Name -
Enter the IP address or
Domain Name for the
System. This will vary
depending on setup
(Internal Network
Connection or External
Remote access through
the Internet)- refer to page
30 for setup details.
• Port - Set to 6100 by
default.
• User ID - Enter the USER
ID to connect to the system
(the USER ID is configured
on the System - i.e. ADMIN
- case sensitive).
• Password - The
password used to access
the System (i.e. The
ADMIN password is set to
1234 by default).
Camera Assign - Set
each camera to a portion
of the 9-view window by
using the drop down
menu selections.
ADD Button - Adds the
site to the Group.
OK Button - Accepts the
changes and Closes the
configuration Window