Filter
Top Products
20
␣Call Waiting␣
If Call Waiting is on, you hear a call-waiting
tone when a call comes in and all your lines
are in use. This feature works only on SA and
ICOM buttons, not on line buttons labeled
with phone numbers.
When a call is waiting, you hear a single beep
(inside call) or two beeps (outside call).
To complete a call and answer a waiting call:
1. When you hear the call-waiting tone, hang
up.
2. When the phone rings, lift the handset or
press the Speaker button.
To put a call on hold and pick up a waiting call:
1. Press the Hold button.
2. Press an ICOM Originate Only or SA
Originate Only button. (You must have
one of these buttons available to pick up
the call.)
3. Press the Feature button and dial 87.
4. To return to the call on hold, press the
button with the fast-flashing green light.
To turn Call Waiting on or off:
1. Press the Menu button and select
Ext
Program
[
Prog
].
2. Select
Start
and press any line button.
3. Select
ListFeature
[
List
].
4. Select
CallWaiting
[
CWait
] and then select
On
or
Off.
5. Select
Enter
and press the Home button to
exit programming.
␣Coverage␣
To program:
See Programming Buttons & Settings, p. 27.
Coverage allows to your extension to ring
elsewhere, so that they can be handled by
someone else. If your system has voice mail,
your calls can also be covered that way. There
are three types of coverage:
• Primary Coverage. If your calls are
covered this way, they ring immediately at
the covering phone.
• Secondary Coverage. The covering
phone rings after a delay of 2 rings, giving
you a chance to answer first.
• Group Coverage. Calls for a group of
people (coverage group) may be covered
by one or more people. Your system
manager can tell you how this works at
your office..
Covering phones are programmed with Cover
buttons used to answer calls for others. Delay
Ring on the covering phone can add a longer
delay before your calls ring there. If line
buttons on your phone are set to No Ring,
however, calls on those lines are not covered
(see Rings, p. 4).
To control coverage of inside calls, use these
programmable settings: Coverage Inside On
allows your inside calls to ring elsewhere;
Coverage Inside Off turns inside coverage off.
You can also program buttons for these
Coverage features:
• Use a Coverage VMS button to prevent
or allow coverage of your outside calls by
a voice mail system. These calls may still
be covered by a person at another
extension.
• Use a Coverage Off button to turn off or
on all coverage of your calls.
Often-Used Features
␣Camp-On␣
To program:
See Programming Buttons & Settings, p. 27.
Use this feature to hold a call at a busy
extension; the call rings when the extension is
available.
To camp on a busy extension so the call will
ring at the extension when available:
1. Press the Home button.
2. Select
CampOn
[
Camp
].
Note: Do not use Camp-On if your system is
equipped with a voice mail system.