Filter
Top Products
23
␣Park␣
Park puts a call on a special type of hold so
that it can be picked up from any phone in the
system. A user can park a call and then pick it
up at another telephone or can use Paging to
announce the call so that another person can
pick it up. Pick up a parked call by using the
Pickup feature. See Park & Pickup.
To park a call at your own extension on the
button that the call arrived on:
• Press the programmed Park button,
OR
• Press the Transfer button, dial your
extension, and press Transfer again,
OR
• Press the Feature button and select
Park
.
You can also park calls at park zones. The
factory setting of the system is to have eight
extensions (881–888) for operator park zones.
Ask your system manager if these park zones
are available. If they are, you can use a DSS
button or program an Auto Dial button (p. 18)
with a park zone extension.
To park at a park zone:
Press the DSS button for a park zone,
OR
Press the Transfer button and dial a park zone
(factory setting: 881–888).
If the parked call is not picked up within the
park return interval (factory setting: 3 minutes),
the call rings back at your telephone.
␣Park & Pickup␣
To program:
See Programming Buttons & Settings, p. 27.
While a call is parked, use Paging to summon
the co-worker who should answer. The person
picks up the call using Pickup (p. 24) and
dialing your extension.
To use Park and Paging:
1. Park the call.
• Press the programmed Park button,
OR
• Press the Transfer button, dial your
extension, and press Transfer again,
OR
• Press the Feature button and select
Park
,
OR
• Press the Transfer button and dial the
park zone.
2. Set up the page.
•
For Speakerphone Paging:
a) Press the appropriate Group Page or
Page All button,
OR
Press any ICOM or SA button and dial
the Group Page or Page All extension.
b) Announce the call and give your
extension or park zone.
•
For Loudspeaker Paging:
a) Press the programmed Loudspeaker
Paging button,
OR
Press the Feature button and select
LoudspkrPg
[
LdsPg
]. If necessary, dial
the zone.
b) Announce the call and extension where
the call is parked.
3. Hang up.
To pick up a parked call:
1. Lift the handset.
2. Press the programmed Pickup button,
OR
Press the Feature button and dial 9.
3. Dial the extension where the call is parked
or use the DSS button.
Often-Used Features