Filter
Top Products
20
Connecting a camcorder to the front jacks
The front video and audio in jacks can be used to easily connect a camcorder to the DVD
recorder. These jacks are in the lower right corner of the front panel.
Good Picture Quality
If your camcorder only uses a video output (Composite Video or CVBS), connect the
VIDEO input of the DVD Recorder to the corresponding output jack on the camcorder.
You must also connect the AUDIO left/right in jacks of the DVD Recorder to the audio out
jacks on the camcorder.
Choose 'CAM1' as the DVD Recorder's channel when using these jacks.
Connecting audio devices to analog
audio jacks
There are two analog L AUDIO R OUT jacks (audio output left/right) and two
L AUDIO R (audio input left/right jacks on the back of the DVD Recorder.
These can be used to connect the following devices:
•) A receiver with Dolby Surround Pro Logic
•) A receiver with twochannel analog stereo
Can I use the 'Phono input' of my amplifier?
This amplifier jack (input) should only be used for record players without
a pre-amplifier. Do not use this input jack to connect the DVD
recorder.
This could damage the DVD Recorder or the amplifier.
?
Connecting additional devices