Filter
Top Products
28
Assigning the VCR Plus+
®
channel
numbers
If you intend to use the VCR Plus+
®
programming system, you must first assign Guide channel
numbers to the TV channels.
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2
Select '
A
' using D or C .
3
Select 'Installation' (in the second menu page) using B or
A and confirm with C .
4
Select 'VCR Plus+ Ch.' using B or A and confirm with C .
Installation
VCRPlus+ Ch.
VCRPlus+ Ch. Channel
...
001 ---
002 ---
003 ---
004 ---
005 ---
...
To exitpress
SYSTEMMENU
5
Use B or A to select the 'VCR Plus+ Ch.' channel number
you want to assign to a TV channel.
6
Use D or C , or the number buttons 0..9 to select the TV
channel that corresponds to this channel number. An 'VCR
Plus+ Ch.' overview of numbers/TV channels can be found in
your daily newspaper or in your TV listings.
7
Confirm the allocation with OK . Repeat steps 5 to 6 to assign
all the channel numbers.
8
To end, press SYSTEM-MENU repeatedly.
Installing your DVD recorder