Filter
Top Products
27
Switching audio recording (Stereo, SAP)
Some TV programs broadcast additional audio (SAP - Secondary Audio Program). In most cases
this means an additional language is available. For example, if a program is available in English and
Spanish, Spanish can be broadcast as the additional audio program (SAP).
To record TV programs in stereo or SAP, you can select Stereo or SAP as the setting of
'Recording audio'. This setting does not become active until the sound of a TV program is
transmitted in Stereo or SAP.
When you playback the recording, you can play the sound only in the setting you selected for
recording (a recording in SAP can be played only in SAP).
1
Turn on your TV. Select the channel number for the DVD
Recorder (Audio/Video In or channel 3 or 4).
2
Turn on the DVD Recorder by pressing STANDBY-ON m .
3
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
4
Select '
A
' using D or C .
Language
Playbackaudio English
Recordingaudio Stereo
Subtitle English
Menu English
5
Select the 'Language' menu using B or A and confirm with
C .
6
Select 'Recording audio' with B or A and confirm with C .
7
Select 'Stereo'or'SAP' using B or A and confirm with OK .
A TV program is only available in 'Stereo' but my setting is
'SAP'?
If the setting for 'Recording audio'is'SAP' but the TV channel
broadcasts only in stereo, the recording will be done in stereo.
?
8
To end, press SYSTEM-MENU .
ENGLISH
Installing your DVD recorder