Filter
Top Products
11
ENGLISH
Remote Control
NAMES AND FUNCTIONS
(Play) button (Page 18, 20, 37, 38)
DIMMER
ENTER
RETURN
T-C
+10
RANDOMREPEAT
MENU
TOP
MENU
AUDIO
SUBTITLE
ANGLE
OSDPROGRAM
SETUP
LAST
MEMORY
CONDITION
MEMORY
CLEAR
0
987
654
321
A-B
OPEN/CLOSE
REMOTE CONTROLLER
RC7010DV
VIDEO ON/OFF
POWER button (Page 15)
REPEAT button (Page 39)
RANDOM button (Page 40)
OSD button (Page 46)
MENU button (Page 19)
(Direction) button (Page 15, 18, 19)
Number button (Page 19, 38, 42)
CLEAR button (Page 39, 40, 41)
AUDIO button (Page 31)
CONDITION MEMORY button (Page 45)
DIMMER button (Page 10)
REPEAT A/B button (Page 39)
(Next) button (Page 19, 20, 40)
(Previous) button (Page 19, 20, 40)
OPEN/CLOSE button (Page 18, 21)
TOP MENU button (Page 19)
(PAUSE / STEP) button (Page 37)
RETURN button (Page 19, 23)
(Stop) button (Page 19, 21, 41)
T-C button (Page 38)
ANGLE button (Page 29)
SETUP button (Page 15, 22, 23)
SUBTITLE button (Page 32)
LAST MEMORY button (Page 44)
VIDEO ON/OFF button (Page 47)
(Foward/Slow) button (Page 20, 37)
(Reverse/Slow) button (Page 20, 37)
/
/
/
/
/
PROGRAM button (Page 41)
ENTER buttons (Page 15, 18, 19)
• This remote control supports two remote control codes: DVD1 and DVD2.
• When the unit is shipped from the factory, the remote control is set to DVD1.
• To set the remote control to DVD2, hold down both the “7 (Stop)” button and the “2” number button on
the remote control for at least five seconds. (If the batteries in the remote control are replaced while the
remote control is set to DVD2, the setting will revert to DVD1.)
• To set the remote control back to DVD1, hold down both the “7 (Stop)” button and the “1” number button
on the remote control for at least five seconds.
• To check which remote control code is set at any time, hold down both the left and right direction
buttons; the current setting (either “DVD1” or “DVD2”) will be displayed in the display window on the
main unit.
• Also set the REMOTE CONTROL CODE switch on the rear panel of the Player to the same setting as
the remote control. (This switch is set to DVD1 when the unit is shipped from the factory.)