38
ENGLISH
Searching for a Title, Chapter,
Track, or Location on a Disc
– DVD/Video CD/CD
This player offers different ways of accessing the information
on a DVD, Video CD, or CD. Using SEARCH MODE, you can
search for titles or chapters on a DVD, tracks on a Video CD
or CD, and even select the point in time to start playback.
1 Press T/C repeatedly to select the type of
search.
The type of search changes which each press as
follows.
2 Press the number button(s) of the desired title,
chapter or track or of the specific time where
you would like to begin playback.
• To select number 3, press 3.
• To select number 10, press 1 and +10/0 rapidly.
• To select number 87, press 8 and 7.
When performing a time search:
• To select 21 minutes, 43 seconds, press
2, 1, 4, and 3.
• To select 1 hour, 14 minutes, press 7, 4, +10/0 and
+10/0.
Note
• To select number 0, press +10/0 rapidly.
3 Press PLAY
33
33
3.
Playback of the selected title, chapter or track starts.
When a time search is performed, playback begins at
the appointed time.
Notes
• For some discs, selection can be made using the top menu on
the DVD. In this case, press TOP MENU to display the menu
screen and then make your selection.
• With some DVDs, the search operation may not be possible and
may stop shortly after being performed. In this case, the
mark is displayed.
• Time search is not possible with CDs.
• When performing DVD time search, playback may start from a
slightly different time than that specified.
• Time search is not possible during when the disc is stopped.
• Search using time search is not possible during PBC playback
of Video CDs.
To perform a direct title or chapter/track search
using the number buttons
• Press the number buttons while the disc is stopped to
select a title number.
• Press the number buttons while the disc is playing to select
a chapter or track.
Note
Direct search cannot be performed for title, chapter, or track
numbers 20 or higher. To search for titles, chapters, or tracks with
numbers 20 or higher, use the title or chapter/track search
procedures using SEARCH MODE as described on this page.
Notes (for direct search)
• To select number 3, press 3.
• To select number 10, press +10/0 for longer than 1 sec and then
press +10/0 rapidly.
• To select number 13, press +10/0 for longer than 1 sec and then
press 3 rapidly.
Memo
• To select number 10, press +10/0 for longer than 1 sec.
• To select number 0, press +10/0 rapidly.
3 Title
33
33
3 Chapter/Track
Off
22
22
2 Time
22
22
2
DIMMER
ENTER
RETURN
T-C
RANDOMREPEAT
MENU
TOP
MENU
AUDIO
SUBTITLE
ANGLE
OSDPROGRAM
SETUP
LAST
MEMORY
CONDITION
MEMORY
CLEAR
0
987
654
321
A-B
OPEN/CLOSE
REMOTE CONTROLLER
RC7010DV
VIDEO ON/OFF
1
2
3
+10