Marantz DV7110 DVD Player User Manual


 
25
ADJUSTING AUDIO AND VIDEO SETTINGS
ENGLISH
Digital Out
Depending on your preferences and the type of connections
made, you may opt not to have the digital audio signal output
at all. When this setting is set to [Off] there is no signal output
from the digital audio output jacks.
Make changes to the [Digital Out] setting in the Setup screen
Audio 1 menu in the [Expert] menu mode (page 23).
Audio1 Audio2 GeneralLanguageVideo
Dolby Digital Out –
DTS Out –
Digital Out
96kHz PCM Out – 96kHz>48kHz
MPEG Ou
t – MPEG 3 PCM
Move
Exit
Off
Off
On
Dolby Digital
SETUP
MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV component
that has a built-in MPEG decoder, select the [MPEG] setting.
Otherwise, select [MPEG
33
33
3 PCM] to convert the digital signal
to the PCM signal, the digital signal output from a CD.
Audio1 Audio2 GeneralLanguageVideo
Dolby Digital Out –
DTS Out – Off
96kHz PCM Out – 96kHz 3 48kHz
MPEG Ou
t
Move
Exit
MPEG 3 PCM
MPEG
Dolby Digital
SETUP
Change MPEG audio output mode
Settings: MPEG
MPEG
33
33
3 PCM*
*
Factory setting
Settings: On (Digital bitstream is output)*
Off (Digital bitstream is not output)
* Factory setting
Adjusting the Dynamic Range
of the Audio Soundtrack
– DVD
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
Select from three levels of compression depending on how
much effect you want. When Audio DRC is set to [Off], there
is no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
Audio DRC
Move
Exit
High
Medium
Low
Off
SETUP
Dynamic playback at low volume
Audio1 Audio2 GeneralLanguageVideo
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
*
Factory setting
Note
Audio DRC is only effective with Dolby Digital audio sources.