Filter
Top Products
29
ADJUSTING AUDIO AND VIDEO SETTINGS
ENGLISH
Viewing from a Desired
Camera Angle (Multi-Angle)
– DVD
You can select a camera angle when viewing DVDs with the
multi-angle option.
Press ANGLE during playback.
The camera angle changes each time you press the button.
Notes
• You can use the Multi-Angle function only with discs featuring
recordings of images shot from different camera angles.
• During Multi-Angle playback, the
indicator in the display
lights.
• For some discs, selection can be made using the DVD menu.
In this case, press MENU to display the DVD menu screen and
then make your selection.
To check whether or not a disc is recorded with angles:
The jacket of discs that are recorded with angles will be marked with
. When locations on discs that are recorded with angles are
played back, the
indicator can be displayed.
To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup
screen Video menu described in the section below.
Turning the angle indicator on and off
When a picture recorded in different angles is played back
is displayed on the screen. This setting lets you see
clearly whether the playback picture is recorded in multiple
angles or not.
Turn the angle indicator on or off in the [Angle Indicator]
setting in the Setup screen Video menu in the [Expert] menu
mode (page 23).
Note
Even when the [Angle Indicator] setting is set to [Off], the
indicator in the display panel of the player lights during multi-angle
playback. Therefore, it is possible to know when the multi-angle
function can be used without having to display the icon on the
screen.
Audio1 Audio2 GeneralLanguageVideo
Off
TV Screen –
Picture Quality –
Still Picture –
On Screen Display – On
OSD Position – Normal
Angle Indicator
Move
Exit
Standard
16:9(Wide)
Field
On
SETUP
Settings: On* ( is displayed)
Off (Not Displayed)
* Factory setting
«
\
»
|
ANGLE : 1/4
ANGLE : 2/4
ANGLE : 3/4
ANGLE : 4/4
DIMMER
ENTER
RETURN
AUDIO
SUBTITLE
ANGLE
OSDPROGRAM
SETUP
LAST
MEMORY
CONDITION
MEMORY
REMOTE CONTROLLER
RC7010DV
ANGLE