Filter
Top Products
36
How to Set the Ratings, con’t
Figure 52
Figure 51
Figure 50
Password
The Password of 0000 used in the previous Rating Level
example or any other previously entered password may be
changed at any time. To change the current password per-
form the following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Disc Setup Menu.
Then press the Right directional Push-button to se-
lect the Ratings Setup Menu Icon Tab. Refer to figure
44.
Note: If there is a Disc playing in the MVP861 press the
STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button to select
PASSWORD followed by the pressing the SELECT
Push-button twice. Refer to figures 50 and 51 on page
36.
Notes: The title of the icon button-bar will change color
from yellow (the cursor color) to green indicating
the selected item.
3. Using the Numeric Push-buttons on the Remote Con-
trol enter the current password. Refer to figure 52.
4. Again, using the NUMERIC Push-buttons on the Re-
mote Control enter the new password to confirm it. Re-
fer to figures 53 and 54.
5. Press the SELECT Push-button.
6. Return to the Rating Menu by pressing the Up direc-
tional Push-button.
7. Next continue to the OTHER SETUP Menu. If no
other changes are to be made in Setup Mode at this
time, exit by pressing the Down directional Push-
button to select the EXIT SETUP menu choice fol-
lowed by the SELECT Push-button and the MVP861
will return to normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.