Filter
Top Products
47
How to Operate the MVP861, con’t
Figure 84
Figure 85
2. Press the RPT (Repeat) Push-button once to activate
the Track Repeat (1); press the RPT Push-button twice
to activate the Group Repeat (All). Refer to the On-
Screen Text Message.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button until the On-Screen Text
Message indicates “REPEAT Off” or the word “RE-
PEAT” in the lower right hand corner of the Front
Panel Alphanumeric Display is extinguished.
SACD or CD Repeat
This allows repeating a SACD/CD Track or the Disc on a
continuous basis. Refer to the lower right hand corner of
figures 82, 83 and figure 87.
1. Start playing the disc or the part of the disc you desire
to have repeated.
2. Press the RPT (Repeat) Push-button once to activate
the Track Repeat (1); press the RPT Push-button twice
to activate the Disc Repeat (All). Refer to the On-
Screen Text.
3. To cancel the previously selected Repeat Mode, press
the RPT (Repeat) Push-button Push-button until the
On-Screen Text message indicates “REPEAT Off” or
the word “REPEAT” in the lower right hand corner of
the Front Panel Alphanumeric Display is extinguished.
Disc A-B Repeat
This feature allows the repeating of a specfic disc segment
on a continuous basis. Refer to the lower right hand corner
of figures 84, 85 and figure 87.
1. Start playing the part of the disc you desire to have re-
peated.
2. Press the A-B Push-button once to to enter the A (start-
ing point) and press the same push-button a second
time B (ending point). Refer to the On-Screen Text.
3. To cancel A-B REPEAT function press the A-B Push-
button once again. The On-Screen Text message indi-
cates “A to B CANCELED” or the word “REPEAT A-
B” in the lower right hand corner of the Front Panel
Alphanumeric Display is extinguished.
Figure 87
Random Playback
This feature allows for listening to Tracks of a SACD or
CD Disc in a Random Order. It also allows for the play-
back of Tracks in a Group on a DVD-Audio Disc in ran-
dom order. Refer to figure 87.
Note: The MVP861 must be in STOP Mode with the Disc
Loaded (Table of Contents) read first before the
Random Playback Mode Feature can be activated.
1. After the Table of Contents has been read with the
transport in the full stop mode (press the Stop Push-
button Twice), press the Random Push-button. Refer to
the lower right hand corner of figure 86.
2. Press the PLAY
Push-button to start
Random Playback,
after all the tracks
have been played the MVP861 will stop.
Note: To provide continous playback of the disc, the
Repeat All Mode may be combined with the
Random Playback
mode.
3. To cancel the Random Play-
back function press the Ran-
dom Push-button.
Figure 86