Filter
Top Products
48
How to Operate the MVP861, con’t
Audio Disc Program Playback Mode
This feature allows for the playback of pre-selected Groups
and/or Tracks of a DVD-Audio, SACD and CD Discs in
the desired order. In the example below, a DVD-Audio
Disc is programmed to play Group 2/Track 5 followed by
Group 1/Track 2.
Notes: 1.The MVP861 must be in full STOP Mode (two
presses of the STOP Push-button) with the Disc TOC
(Table of Contents) read before the Program
Playback Mode Feature can be activated.
2. When programming Hybrid SACD Discs, first
choose the format (Multichannel, Stereo or CD) so
the correct TOC can be read as some discs have
different selections.
3. If a DVD-Audio disc has both formats (DVD-Audio
and DVD-Music Video), only the DVD-Audio
Groups/Tracks are programmable.
1. Press the PGM (Program) Push-button to access
the On-Screen Program Mode. Refer to figures 88,
89 and 96.
Note: It is
possible
to enter a
Program
using
just the Front Panel Alphanumeric Display,
however it is easier to use the On-Screen
Display as all of the desired Groups/Tracks are
displayed at one time.
2. Enter the first Program Step, the desired selection
and Group Number using the Numeric Push-but-
tons. Refer to
figures 90, 91
and 96.
Note: There are
only
Track numbers when Programming SACD and
CD Discs. The On-Screen Display along with
the Front Panel Display will not indicate space
for entering Group Numbers. The MVP861
automatically stores into memory each of the
program steps as they are entered.
3. In a similar manner, enter the remaining desired
Groups and Tracks. Refer to figures 92 and 93.
Note: The Left or Right directional Push-buttons
may be used for a given Progam Step, to go
between the Group Number and Track Number.
The CLEAR Push-button may be used to delete
a selected Progam Step.
Figure 91
Figure 92
Figure 90
Figure 88
Figure 89