Filter
Top Products
101
For the manual search, you must know the fre-
quency, the symbol rate and the polarisation of
the station for which you want to search.
Executing the manual search
•
Press the MENU key to open the TV menu.
• Press the red key to open the menu "Confi-
guration"
• Press the appropriate numeric key (in this exam-
ple
ᕥ
to select "DVB-S".
• The cursor is located on the line "LNB supply
voltage".
• Press the appropriate numeric key (in
this example
ᕩ
to select "Manual
search".
• The cursor then moves to "Satellite". If
more than one satellite is available,
use the
-
+
key to select the desired
satellite.
• In the setting window, use the cursor
control key ̈ to select the menu line
"Frequency".
• Use the numeric keys or the
-
+
key to
set the frequency.
• In the setting window, use the cursor control key
̄ to select the line "Polarisation" and use the
-
+
key to select " H=Horizontal" or "V=Vertical".
• In the setting window, use the cursor control key
̇ to select the line "Symbol rates" and enter the
symbol rate with the numeric keys.
• In the setting window, use the cursor control key
̄ to select the line "Start station search" and
press the OK key to start the search.
The station is placed in the station table. If des-
ired, you can sort or move stations to other posi-
tions in the table or delete unwanted stations.
For details, see Section 24 of the operating
instructions for the TV set.
A2. Setting the stations
Manual search
Calling the menu
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
ᕥ
ᕩ
OK
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Satellit Astra1 Frequency11836 MHz
Symbol rates 27500 Polarisation H
Start station search
Change with
Accept value with
F1
➔
OK
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 101