Filter
Top Products
98
You can set up to four satellites in the menu "Con-
figuration". No satellite is set in the factory.
The LNB frequency is used to switch between the
high and low frequency bands. The default fre-
quencies Low band 9.75 GHz and High band
10.60 GHz are set in the factory.
Selecting satellites
• Press the MENU key to open the TV menu.
• Press the red key to open the menu "Confi-
guration".
• Press the appropriate numeric key (in this exam-
ple
ᕥ
to select "DVB-S".
• Press the appropriate numeric key (in
this example
ᕣ
to select "Satellite A".
• Use the
-
+
key to select the desired
satellite. The most common satellites
are displayed one after the other,
together with the symbol rates for
each one. Depending on the satellite,
it may be necessary to set additional
symbol rates manually if the selected
satellite uses different symbol rates
and you wish to find the related
transponders in an automatic station
search.
• Use the cursor control key to select "Low band"
or "High band". The settings depend on the
components installed in the satellite antenna. For
the correct settings, please consult the data sheet
or the label of the LNB(s) being used.
• Press the OK key to confirm the new settings.
• Press the EXIT key to close the TV menu.
Calling the menu
A1.2 Set-up of satellite system
Selecting satellites
MENU
ᕥ
ᕣ
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
EXIT
General settings
Manuall search
Automatic search
Search settings
Satellite D
Satellite C
Satellite B
Astra 1
DiSEqC system
LNB supply voltage
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Satellite Astra 1 Symbol rate 1 22000
Low band 9,75 GHz Symbol rate 2 27500
High band10,60 GHz Symbol rate 3 - - - - -
Change with the
numeric keys or
. Accept
value with
F1
➔
OK
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 98