Filter
Top Products
72
MENU
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
27. Sound via HiFi Amplifier
HiFi output
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
81) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
Settings need to be made in the menu items "HiFi
output" and "Sound settings" only if the TV set is
connected to a HiFi system.
If you want adjust the sound settings exclusively on
the HiFi system, you must set the HiFi output to
constant.
You can then no longer adjust the volume and
tone with the Metz remote control. The
mute function remains active.
If you want to be able to change the
sound settings with the Metz remote
control, you must set the HiFi output to
variable.
Setting the HiFi output
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the
menu "Configuration".
• Use the cursor control key ̈ to select
"Initial programme position".
• Use the corresponding numeric key (in the
example:
·) to select " HiFi output".
• In the setting window, use the
-
+
key to set the
desired parameters.
• Press the "OK" key to save the new settings.
• Press the "EXIT" key to close the TV menu.
In normal TV Mode, the function "Sound via..."
can be activated temporarily by pressing the yel-
low key and using the
-
+
key.
Opening the menu
ᕢ
OK
EXIT
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Init. prog.position
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
HiFi output constant
Output level 50%
Change with
Accept value with
F1
➔
– +
OK
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 72