Filter
Top Products
60
DVB-C station search
The DVB-C station search operation searches the
entire frequency band for TV and radio stations.
All stations which are found are placed in separa-
te TV and radio station tables. See Section 29 for
details of DVB radio mode.
If you are not satisfied with the order in which the
stations are displayed, you can move them to
other positions or delete unwanted stations (see
Section 24., "Sorting stations".
Executing the automatic search
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the menu
"Configuration".
• Press the numeric key
² to select
"DVB-C".
• The cursor is now on the menu line
"Search settings".
•
Press the "OK" key and, in the setting
window, use the
-
+
key to select "All",
"FTA only" or "FTA +CICAM" (see also
page 58).
• Press the "OK" key and then press the corres-
ponding numeric key (in the example: ·) to
select "Automatic search". The cursor is now on
the line "Symbol rate 1".
The most common symbol rates are already
preset. Usually these settings do not need to
be modified. If the symbol-rate settings do
not yield the desired result, set other sym-
bol rates and save them by pressing "OK".
Ask your cable operator for details.
• Press the cursor control key ̈ to select the menu
line "Start station search".
• Press the "OK" key to start the search. The TV
set now searches for available stations.
☞
22.3 Setting Stations
Automatic DVB-C station search
Opening the menu
General settings
Manuall search
Automatic search
Search settings
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Symbolrate 1 6900
Symbolrate 2 6875 Start station search
Symbolrate 3 6111
Start station
search with
F1
➔
MENU
ᕦ
ᕢ
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
OK
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 60