Filter
Top Products
28
12.2 Sound Settings for Prog.
via the Station Table
Opening the menu
Some of the menu items are not available
in a 2 ** menu.
Making sound corrections:
• Select the programme position whose sound set-
tings you wish to change.
• Press the "MENU" key.
The TV menu appears on the screen.
• Press the white key . The station table is dis-
played with the currently active programme
position highlighted.
• Press the F2 key to enable editing of
the station table.
• Use the cursor control key ̈ to move
to the subjects side.
• Use the corresponding numeric keys
(in this example:
¶) for sound cor-
rections) to select the desired menu
items.
• In the setting window, use the cursor
control key to select the desired func-
tions.
The use of the
-
+
key to change the selected set-
ting. "gen." means here that the new setting will
overwrite the general sound settings (see pages
24 and 26).
The individual settings made here, which
differ from the standard values, remain
saved.
Press the "OK" key to save the new settings.
Press the "EXIT" key to close the TV menu.
☞
☞
MENU
F2
0010Hessen 3
0009Südwest
0008MDR
0007PRO 7
0006RTL 2
0005RTL
0004SAT 1
0003 Bayern 3
0002ZDF
0001ARD
Volume correction 0 Tone settings gen.
Forced mono off
: select
: go to the
settings.
Sound corrections
Colour standard
3)7)
Picture quality
Picture correct.
Enter logo
Station contained in EPG
Frequency/channel
OK
EXIT
¶
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
605 47 2029.A2 LCD-GB 10.03.2006 8:52 Uhr Seite 28