Filter
Top Products
71
You can define an initial programme position in
this TV set. This initial programme position is used
primarily to select the AV programme position if
you use an external receiver.
Setting the initial programme position
This menu item is not available in a 2 **
menu.
Select a receiver (satellite or set-top box) in the
menu "AV devices" and connect the receiver to the
TV set (see also Section 25, Registering AV Devi-
ces").
• Press the "AV" key.
• Use the numeric keys to select the
position "Sat/Set-top" in the AV
menu.
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the
menu "Configuration".
• Use the cursor control key to select
"Operation" and then "Initial pro-
gramme position".
• Press the "OK" key and, in the setting window,
use the
-
+
key to select "Yes".
• Press the "OK" key to save the new setting.
• Press the "EXIT" key to close the TV menu.
The AV programme position will now be
selected automatically when you switch on
the TV set with the main power switch.
☞
☞
26. Initial Programme Position Opening the menu
MENU
OK
OK
OK
EXIT
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Init. prog.position
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Switch on with this station? Yes
Change with
Accept value with
F1
➔
– +
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 71