Metz Plasma-TV-Set Flat Panel Television User Manual


 
73
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
81) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of a Cinch cable, you must select the function
"Sound via HiFi".
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of an optical audio cable ("Toslink", available
as an accessory), the following settings
should not be made.
Setting sound via HiFi
• Press the "MENU" key to open the TV
menu.
• Press the red key to open the menu
"Configuration".
• Press the "OK" key to move to the
right-hand column.
• Use the cursor control key ̆ or the
corresponding numeric key (in the
example:
») to select "Sound settings".
• In the setting window, use the cursor control key
̈ to select the menu item "Sound via…".
• Use the
-
+
key to select "Sound via HiFi".
• Press the "OK" key to save the new setting.
• Press the "EXIT" key to close the TV menu.
In normal TV Mode, the function "Sound via..."
can be activated temporarily by pressing the yel-
low key and using the
-
+
key.
27. Sound via HiFi Amplifier
HiFi output
Opening the menu
EPG settings
Display configuration
2)
Operating
Sound settings
HiFi output
2)
Init. prog.position
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
Analog-TV
Country
Language
Operating
Mute (two-stage) off Sound via HiFi
Change with
accept value with
F1
OK
MENU
OK
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
– +
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 73