Filter
Top Products
70
25.1 Removing AV DevicesOpening the menu
MENU
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
OK
This menu item is not available in a 2 **
menu.
If desired, you can change the factory settings for
AV devices (a video recorder on the EURO1
socket and a DVD player on the EURO2 socket).
Removing an AV device from the TV set
• Press the "MENU" key to open the TV menu.
• Press the yellow key to open the menu "AV
devices".
• Use the cursor control key to select the device
you wish to remove and press the "OK" key.
The cursor is on the line "Connect".
• Press the "OK" key again. A message
is displayed, asking if you really want
to change the connected device.
• Press the OK key again to remove the
connected device.
• Press the "EXIT" key to close the TV
menu.
☞
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
DVD/Videorec.1
Connect as follows:
DVD/Videorec. 1
VCR
F1
➔
:select
:connect
and clear..
OK
DataLogic
Activate TV-SPDIF-inp
Name
Signal types
Connect
✗
✗
605 47 2029.A2 LCD-GB 10.03.2006 8:53 Uhr Seite 70